Slomo.tv

Arrow 2110: A New Era of IP Broadcasting. Accessible, Flexible, Powerful

Television production has long evolved along the path of increasing physical infrastructure complexity. First came composite cable, where video was transmitted over a single coaxial cable, while audio was carried separately over a second cable. This was followed by component cable – three cables for video and two for audio. Component cable was then succeeded by SDI – a single coaxial cable for transmitting both video and audio. SDI also grew more complex over time – first transitioning to 3G SDI, then to 6G, 12G... But the higher the speed, the shorter the permissible cable length and the more difficult scaling becomes. A major studio or sports arena means hundreds of connections, bulky racks, and rigid dependence on physical topology.

That was the case until the development of SMPTE 2110.

Why 2110?

The SMPTE 2110 suite of standards enables the transmission of uncompressed video, audio, and metadata over standard Ethernet networks.

One cable – one connector – one interface.

Instead of a bundle of coaxial cables for each camera, you get the ability to route signals via software, without physical patching, using standard network switches.

Previously, IP adoption was expensive and complex: it required compression (standards 2022-6/7) or specialized equipment. Today, however, with the development of telecom standards – 10G, 25G, 100G, 200G, 400G – the situation has changed. 100G Ethernet can carry 8 Ultra HD channels or 32 3G channels through a single port.

Arrow 2110 is our answer to this technological shift. We didn’t just add IP support; we rethought the device architecture to ensure you get the most out of the transition to SMPTE 2110.

Architecture Without Compromises

Our approach is built on high-performance solutions, delivering unique flexibility:

Channel Density

Using the SMPTE 2110 standard, Arrow 2110 allows you to input up to 32 3G channels (or 8 4K channels) through a single connector.

Redundancy

For critically important broadcasts, the system is designed to operate using two independent networks in parallel ("red" and "blue" subnetworks). If one network fails, the equipment automatically continues operating on the other.

Internal Routing

Designed to receive dozens of channels over IP, the system is also a full-featured software router. You can reassign streams, create multi-channel Multiviewers, and distribute signals without a single physical re-patch.

Multiviewers Without Limits

Previously, the number of display outputs was strictly limited by physical ports. In the IP world, that no longer matters: you can now build a Multiviewer from 32 3G channels, or create a Multiviewer in 4K and output it to a 77-Inch TV through an optical cable or a Blackmagic Design HDMI™ converter.

Working with 4K and 8K

IP unifies the interface – working with 4K no longer requires replacing hardware. Arrow 2110 handles 4K or 8K seamlessly. The interface remains the same. This approach meets current demands while equipping you for the future, ensuring 8K production readiness today.

4K
6 inputs / 2 outputs
Ultra HD without limits
8K
1 input / 1 output
Ready to embrace the format of the future

Arrow 2110: Server-Class Approach & Versatility

Arrow 2110 is a server in a 2U form factor supporting HD, 3G SDI, and 12G SDI. SMPTE 2110 is not just a trendy buzzword. It’s a way to eliminate cable clutter, reduce deployment costs for complex systems (from sports arenas to broadcast studios), and gain the kind of flexibility that was only a dream with SDI.

Arrow 2110 is the guide into the world of SMPTE 2110 production. We deliver a ready-made architecture that includes multi-channel recording with 4K/8K support, internal routing, and support for additional workstations.

The future of broadcasting starts here. Start with one cable.

SMPTE 2110 + Arrow 2110: flexibility, redundancy, and 8K readiness today.

Key Benefits of Transitioning to IP Infrastructure

✔️ 32 3G channels through 1 port ✔️ 8 4K channels over 100GbE ✔️ Full redundancy – "red" / "blue" subnets ✔️ Software-based internal routing ✔️ Multiviewer with up to 32 sources ✔️ 8K support without hardware changes

Discover other models

Arrow Series
Technical characteristics
Parameters Arrow III Arrow V Arrow 4K Arrow 2110
Video Inputs
HD / 3G SDI 8 16
HD / 3G / 12G SDI 8
Ethernet 2 (QSFP28)
Total video inputs via SDI connection (Replay Mode / Recording for NLE *)
HD 7 / 8 14 / 16 7 / 8
3G ** 7 / 8 14 / 16 7 / 8
12G *** 4
Total video inputs via SMPTE 2110 connection (Replay Mode / Recording for NLE *)
HD / Full HD 16 / 16
UHD *** 4 / 6
Video Outputs
Total number Up to 2 Up to 2/4 **** Up to 2 Up to 4
Signal Type 3G ** / HD SDI 3G ** / HD SDI 4K *** / 3G ** / HD SDI 4K *** / 3G ** / HD via SMPTE 2110
Options
  • 1st output – Playout with transition effects between clips (PGM)
  • 2nd output – configurable:
    • Preview,
    • Multiviewer,
    • Alpha-channel,
    • Game Analyzer,
    • Delay Output.
  • 3rd output – Second replay workplace ****
  • 4th output – Third replay workplace ****
  • 3rd output – Second replay workplace ****
  • 4th output – Third replay workplace ****
Graphics ports HDMI™, DP
Video Formats
HD 1920×1080 25PsF, 1920×1080 50i,
1920×1080 29.97PsF, 1920×1080 59.94i,
1280×720 50p, 1280×720 59.94p
3G (Full HD) 1920×1080 50p, 1920×1080 60p,
1920×1080 59.94p, 1920×1080 119.88p,
1920×1080 100p
12G (UHD) 3840×2160 50p, 3840×2160 60p,
3840×2160 59.94p, 3840×2160 119.88p,
3840×2160 100p
Multiviewer
Built-in into main interface up to 9 video windows up to 17 video windows up to 9 video windows up to 17 video windows
Separate on second graphics or SDI output up to 16 video windows up to 32 video windows up to 16 video windows up to 32 video windows
MultiSkin

MultiSkin mode displays additional interfaces on primary or secondary monitors at the same time so you can switch between the workplaces seamlessly:

  • Multiviewer with video windows of all cameras, Preview and Program windows.
  • Game Analyzer is designed to draw live or recorded video. It is used for analysis of game situations.
Simultaneous operational channels (Replay Mode)
HD 7 Record
7 Search
2 Playback
+ FX
14 Record
14 Search
2 Playback
+ FX
7 Record
7 Search
2 Playback
+ FX
16 Record
16 Search
2 Playback
+ FX
3G ** (Full HD) 7 Record
7 Search
2 Playback
+ FX
14 Record
14 Search
2 Playback
+ FX
7 Record
7 Search
2 Playback
+ FX
16 Record
16 Search
2 Playback
+ FX
12G *** (UHD) 4 Record
4 Search
2 Playback
+ FX
4 Record
4 Search
2 Playback
+ FX
Simultaneous operational channels (Recording for NLE *)
HD 8 Record
8 Search
16 Record
16 Search
8 Record
8 Search
16 Record
16 Search
3G ** (Full HD) 8 Record
8 Search
16 Record
16 Search
8 Record
8 Search
16 Record
16 Search
12G *** (UHD) 6 Record
6 Search
6 Record
6 Search
Built-in storage (SSD)
8 TB
66 hours HD DVCPro HD codec at 100 Mbps
Optional: 133 hours HD video at 100 Mbps
16 TB
133 hrs. HD video DVCPro HD codec 100 Mbps
Optional: 266 hours HD video 100 Mbps
8 TB
66 hours HD DVCPro HD codec at 100 Mbps
8 TB
66 hours HD DVCPro HD codec at 100 Mbps
Codecs
Basic DVCPro 50,
DVCPro HD,
I-Frame DCT based
DMR™ * ProRes 422, DNxHD, DVCPro 50, DVCPro HD,
XDCAM422 50Mbit, XDCAM 35, AVC-Intra 100/50, XAVC
Export (basic) XDCAM422 50Mbit
Export (advanced) ***** ProRes 422, DNxHD, DVCPro 50, DVCPro HD, XDCAM 35,
AVC-Intra 100/50, XAVC, MPEG2 Long GOP, H.264, MPEG
Containers
QuickTime MOV,
MXF,
MP4
Recorded Audio
Embedded format 16 / 24-bit 48 kHz
HD Replay Mode: up to 56 channels
Recording for NLE *: up to 64 channels
Replay Mode: up to 112 channels
Recording for NLE *: up to 128 channels
Replay Mode: up to 56 channels
Recording for NLE *: up to 64 channels
Replay Mode: up to 128 channels
Recording for NLE *: up to 128 channels
3G (Full HD) ** Replay Mode: up to 56 channels
Recording for NLE *: up to 64 channels
Replay Mode: up to 112 channels
Recording for NLE *: up to 128 channels
Replay Mode: up to 56 channels
Recording for NLE *: up to 64 channels
Replay Mode: up to 128 channels
Recording for NLE *: up to 128 channels
12G (UHD) *** Replay Mode: up to 32 channels
Recording for NLE *: up to 48 channels
Replay Mode: up to 32 channels
Recording for NLE *: up to 48 channels
Replay Audio Channels
8 audio channels embedded into video output signal
Video Exchange
Network 10 GbE 1 GbE 10 GbE 2.5 GbE
USB 3.0/eSATA Built-in trayless/toolless 3.5" SATA HDD Rack
DMR™ RACK 3
Video Standards
HD SMPTE 292M, SMPTE 274, SMPTE 296M SMPTE 2110-20,
SMPTE 2110-21,
SMPTE 2110-30,
SMPTE 2110-40,
SMPTE 2022-7
3G (Full HD) SMPTE 424M / SMPTE 425M
12G (UHD) SMPTE 2082
Controller
Specialized console with push-buttons, T-Bar and Jog/Shuttle
(via RS-422/RS-232/USB/Ethernet interface)
Timecode
LTC (SMPTE 12M-1)
Synchronization
Support of Tri-level and Black Burst
GPIO
2 inputs and 2 outputs for integration with external equipment
(Mixer, Switcher, Automation)
Power
Voltage 110V/60Hz or 220V/50Hz
Consumption 120 W 160 W 160 W 160 W
Physical Parameters
Dimensions 88 mm × 482 mm × 512 mm
Weight 12 kg

Notes:

* – DMR license required.

** – 3G license required.

*** – 4K license required.

**** – Option.

***** – Export option required.

Arrow Series
Options
Option Description Arrow III Arrow V Arrow 4K Arrow 2110
Transfer Ability to transfer any clip or playlist to network integrated servers. Included Included Included Included
Game Analyzer Telestrator for imposition of graphical elements (line, arrow, curved arrow, circle, etc.) and free hand drawing on live video. Best with Wacom Cintiq tablet (not included). Included Included Included Included
Launcher A convenient tool for configuring settings and managing projects according to specific tasks. Included Included Included Included
3G SDI support Support for 3G-SDI signals for 1080p50/60 and 1080i100/200 production. Included
4K Includes 4K/UHD support for servers. A software option for working with video in 4K/UHD format.
DMR™ Multi-Channel Recording direct in NLE native file format with DVCPro/ProRes/DNxHD codecs. Support for XDCAM50/XAVC100 export.
3 DMR™ Racks are included in the chassis

3 DMR™ Racks are included in the chassis

3 DMR™ Racks are included in the chassis

3 DMR™ Racks are included in the chassis
DMR™ 2 The option extends DMR capabilities by adding parallel recording to NAS it allows recording video for NLE simultaneously to two devices (SSD/HDD installed in DMR racks and NAS over the local network).
Requires the DMR option.
Redundant Power * Dual mini redundant Power Supply. Included
Advanced export MXF/QT Export of recorded material in native Apple Final Cut and Avid MC files with DVCPro / ProRes / DNxHD codecs.
Super Motion Support for 2x, 3x, 4x SSM cameras. (Requires 2-4 dedicated input channels).
Xtra Motion Support for 6x GVG LDX-86 HS/XS camera (Requires 3 dedicated 3G SDI inputs) in 180p/360i mode.
HyperMotion Support for 1000FPS Ikegami HiMotion-II camera (Requires from 1 to 3 dedicated SDI inputs). Includes Special HiMotion-II camera Remote cable.
Super-Xtra Motion Super Motion high-speed camera support option:
  • 4x Panasonic AK-HC5000/AK-UC4000 cameras (require 4/3 dedicated 3G SDI inputs) in 240p/180p/240i/180i modes
  • 6x GVG LDX-86 HS/XS cameras (require 3 dedicated 3G SDI inputs) in 180p/360i modes
  • Dream Chip 500 not tied to the number of cameras
2-nd independent replay workplace Additional operator's workplace for 3G/HD mode. Includes the remote controller.
SSD-based storage * SSD-based disk subsystem makes the system lighter, more reliable and insensitive to vibrations and harsh transport conditions. Included Included Included Included
SAS Controller * SAS RAID Controller with 4 External 12G SAS ports.
Storage Expansion * Built-in storage expansion to 133/266 hrs. of 100 Mbit HD video.
Up to 133 hrs.

Up to 266 hrs.
VideoServer for Arrow III Software option for signal delay in live broadcasts (delay from ~3 to 180 seconds for 4 channels) for the program/output signal, used in live television transmissions.
4-16 – channel videoReferee® videoReferee® for 4-16 SDI cameras providing fingertip control browsing, marking, slow motion playback. Display Modes: 4 Live, 1 Live, 4 recorded – Search, 1 recorded – Search/Playback (variable speed), 1 recorded – Zoom search. Includes Control-VR controller.
Up to 8 cameras

Up to 8 cameras
IPConnect Software option enabling the use of IP cameras operating via standard NDI and RTSP protocols:
  • Adding 4 NDI inputs and 1 NDI output to the server
  • Connecting up to 4 additional IP cameras to the server
SLA Extension Server maintenance service for one year (12 months) following the expiration of the warranty period (12 months), and updates of all software versions to the latest release. Support with a one-business-day response time.

Note:

* – Available at ordering

– Available for order.

– Not available for order.

Configuration Description Diagram File
Replay configuration for ST 2110-based operation Example of using a 2U Arrow 2110 server for processing ST 2110-based camera signals (up to 32 HD channels / up to 8 UHD channels). Graphics Port 1 – Main interface. Graphics Port 2 – Multiviewer interface. SDI converter for Program, Preview and Multiviewer outputs. Control-ZR replay console. Redundant power supply option.
This configuration can be used for sports replay production.
Replay configuration for ST 2110-based operation
Replay configuration for ST 2110-based operation with redundancy Example of using a 2U Arrow 2110 server for processing ST 2110-based camera signals (up to 32 HD channels / up to 8 UHD channels) with redundancy. Redundancy is achieved using two separate subnets – "red" and "blue" – for input data. Graphics Port 1 – Main interface. Graphics Port 2 – Multiviewer interface. SDI converter for Program, Preview and Multiviewer outputs. Control-ZR replay console. Redundant power supply option.
This configuration can be used for multichannel recording and sports replay production.
Replay configuration for ST 2110-based operation with redundancy
Configuration for ST 2110-based operation with Multiviewer option Example of using a 2U Arrow 2110 server for processing ST 2110-based camera signals (up to 32 HD channels / up to 8 UHD channels) with the Multiviewer option. Enables Multiviewer signal outputs using various channel combinations and screens of different sizes. Graphics Port 1 – Main interface. SDI converter for Multiviewer outputs. Redundant power supply option.
This configuration can be used for displaying video signals in Multiviewer mode on multiple screens.
Configuration for ST 2110-based operation with Multiviewer option